Guide | Flash / Install New Firmware on Samsung GALAXY ALPHA With ODIN v3.11.1

Flash Stock Firmware Samsung GALAXY ALPHA. On this guide below guidebelajar will explain to you how to Flash / Install New Firmware on Samsung GALAXY ALPHA With ODIN v3.11.1. Odin is official flash tool designed for Samsung device only to help flash a new firmware. Flashing is seem installing a new software on Android device, it's take a lot of risk for your device. So, we recommend you using Samsung’s own utilities OTA (Over-the-air) or Samsung Kies if you want to upgrade Samsung device. Follow this guide only if you sure one hundred percent about risk caused due flashing your Samsung GALAXY ALPHA device.

Samsung GALAXY ALPHA Also known as Samsung Galaxy Alfa, And here are some versions for this device ; G850T (T-Mobile), G850Y, G850F (Europe) G850M (Vodafone); G850FQ. This device is released on 2014, August. Samsung GALAXY ALPHA is the smartphone with 4,7 Inches Super AMOLED capacitive touchscreen, 16M colors, work on Android OS, v4.4.4 (KitKat), upgradable to v5.0.2 (Lollipop), Powered by Octa-core (4x1.8 GHz Cortex-A15 & 4x1.3 GHz Cortex-A7) CPU, Exynos 5430 Octa chipset, Mali-T628 MP6 GPU, combined with 2 GB of RAM and 12 MP of  Main camera and 2,1 MP on secondary camera. 

Prerequisite.

Below is the following things you must do before flashing your Android Samsung GALAXY ALPHA device.

1. Make sure your Samsung GALAXY ALPHA is fully charged. or minimum has 99% of battery capacity. It will avoid the flashing failure process.
2. Flashing process will delete or wipe all data stored in internal memory. So, don't forget to backup all data before flashing device.
3. Make sure you have installed a latest of the Samsung driver, that support with your device, If you don't have, you can download here 
4. Original USB cable driver for your Samsung GALAXY ALPHA.
5. Download Odin V3.11.1, Here. 
6. Firmware Download. (use one of the 3 methods below to download Samsung Firmware)
• One. Download Official firmware file for the model number of your device, download it from - SamMobile, or you can visit http://samsung-updates.com/
• Two. Guide How to Download Official Samsung Firmware From SamMobile. Here 
• Three. Firmware Samsung GALAXY ALPHA, you must Log In to download firmware via this link below.

Guide To Flash Samsung GALAXY ALPHA 

1. You must download all necessary file.(Samsung USB driver and Odin)
2. Then, install all driver to your computer or PC.
3. Extract Odin V3.11.1. file on the destination folder.
4. Switch Off your Samsung GALAXY ALPHA to start flashing process.
5. Then, run Odin3 v3.11.1 by right click on Odin.exe and select Run as Administrator.

   

   Flash Stock Firmware On Samsung GALAXY ALPHA

6. When program is running, now you can click AP, and navigate to the *.tar or *.tar.md5 firmware file. 

   

   Flash Stock Firmware On Samsung GALAXY ALPHA

7. Now your firmware file has been inserted in Odin3 

   

   Flash Stock Firmware On Samsung GALAXY ALPHA

8. Then, Enter download mode your Samsung GALAXY ALPHA. See this guide how to do it.
9. On this mode, now connect your Samsung GALAXY ALPHA to your PC / laptop using a USB cable. 
10. After your phone connected, you will see a message appear that show your device added and there is info on the ID: COM at top left corner. Keep in mind for this COM vary depending on the PC / Laptop. Just Ignore all, in this picture you will see that your device is detected on (COM 5)

    

    Port Com Samsung GALAXY ALPHA

11. Make sure re-partition is NOT ticked
12. When everything already you can click Start Button. at the bottom left corner
13. Just wait for the process to run about 2-5 minutes, and make sure there is no interference in this process. 
14. When complete it will display a notification PASS and your smartphone Samsung GALAXY ALPHA will automatically restart.
15. Wait your device to boot up, it will take a while.
16. When your Samsung GALAXY ALPHA is ready to use, now check your firmware version. See this guide how to check it. 
17. Finish.
18. 
    

how-to-check-samsung-galaxy-firmware-version  Here