Flash / Install New Firmware on Samsung GALAXY MEGA 2 With ODIN v3.11.1 | Guide.

Flash Stock Firmware Samsung GALAXY MEGA 2. Today's guidebelajar will show you how to Flash / Install New Firmware on Samsung GALAXY MEGA 2, and we use ODIN v3.11.1 to help flash firmware into this device. But if you want to upgrade your device firmware we highly recommend you using Samsung’s own utilities OTA (Over-the-air) or Samsung Kies. You can follow this guide below if you sure 97% about risks involved in flashing your Samsung GALAXY MEGA 2 device.

Samsung GALAXY MEGA 2 Also known as Samsung Galaxy Mega 2 LTE, Here are some version for these device ; Samsung Galaxy Mega 2 G750F, Samsung Galaxy Mega 2 G7508, Samsung Galaxy Mega 2 Duos G7508Q for China with dual-SIM card slots. This device is released on 2014, September. Samsung GALAXY MEGA 2 is the smartphone with 6.0 Inches Capacitive touchscreen, 16M colors, work on Android OS, v4.4.3 (KitKat), Powered by Quad-core 1.5 GHz CPU, Qualcomm MSM8916 Snapdragon 410 chipset, Mali-400MP4 GPU, combined with 1,5 GB of RAM and 8 MP of  Main camera and 2,1 MP on secondary camera. 

Prerequisite.

Below is the following things you must do before flashing your Android Samsung GALAXY MEGA 2 device.

1. Make sure your Samsung GALAXY MEGA 2 is fully charged. or minimum has 86% of battery capacity. It will avoid the flashing failure process.
2. Flashing process will delete or wipe all data stored in internal memory. So, don't forget to backup all data before flashing device.
3. Make sure you have installed a latest of the Samsung driver, that support with your device, If you don't have, you can download here 
4. Original USB cable driver for your Samsung GALAXY MEGA 2.
5. Download Odin V3.11.1, Here. 
6. Firmware Download. (use one of the 3 methods below to download Samsung Firmware)
• One. Download Official firmware file for the model number of your device, download it from - SamMobile, or you can visit http://samsung-updates.com/
• Two. Guide How to Download Official Samsung Firmware From SamMobile. Here 
• Three. Firmware Samsung GALAXY MEGA 2, you must Log In to download firmware via this link.
• SM-G750F - Thailand, Malaysia, - Here 
• SM-G7508Q - China (Open China), Hong Kong - Here 

Guide To Flash Samsung GALAXY MEGA 2 

1. You must download all necessary file.(Samsung USB driver and Odin)
2. Then, install all driver to your computer or PC.
3. Extract Odin V3.11.1. file on the destination folder.
4. Switch Off your Samsung GALAXY MEGA 2 to start flashing process.
5. Then, run Odin3 v3.11.1 by right click on Odin.exe and select Run as Administrator.

   

   Flash Stock Firmware On Samsung GALAXY MEGA 2

6. When program is running, now you can click AP, and navigate to the *.tar or *.tar.md5 firmware file. 

   

   Flash Stock Firmware On Samsung GALAXY MEGA 2

7. Now your firmware file has been inserted in Odin3 

   

   Flash Stock Firmware On Samsung GALAXY MEGA 2

8. Then, Enter download mode your Samsung GALAXY MEGA 2. See this guide how to do it. 
9. On this mode, now connect your Samsung GALAXY MEGA 2 to your PC / laptop using a USB cable. 
10. After your phone connected, you will see a message appear that show your device added and there is info on the ID: COM at top left corner. Keep in mind for this COM vary depending on the PC / Laptop. Just Ignore all, in this picture you will see that your device is detected on (COM 5)

    

    Port Com Samsung GALAXY MEGA 2

11. Make sure re-partition is NOT ticked
12. When everything already you can click Start Button. at the bottom left corner
13. Just wait for the process to run about 2-5 minutes, and make sure there is no interference in this process. 
14. When complete it will display a notification PASS and your smartphone Samsung GALAXY MEGA 2 will automatically restart.
15. Wait your device to boot up, it will take a while.
16. When your Samsung GALAXY MEGA 2 is ready to use, now check your firmware version. See this guide how to check it. 
17. Finish.