Guide | Install TWRP Recovery Huawei GR5 2017 - Honor 6X EMUI 5.0 Android 7.0 Nougat.

TWRP Recovery Huawei GR5 2017.  Hi guys, the following guide will show you how to Install TWRP Recovery Huawei GR5 2017. This device also is known as with Huawei Honor 6X. So, if you looking for about this guide you can follow it. By installing a TWRP recovery on your Huawei GR5 2017, you can backup and restore the system, flash any custom ROM, or root this device. This guide is taken from the following video so we can be sure this guide has been successfully tested on the Huawei Honor 6X device. please follow the following guidelines slowly for the expected results.

So, let's get started this guide.

Requirement.

1. Make sure your Huawei Honor 6X run Android Nougat 7.0 and EMUI 5.0.
2. Enable USB debugging and OEM Unlock
3. Unlock Bootloader your Huawei GR5 | Honor 6X. You can read this guide to unlock bootloader Huawei phone.
4. Downl0ad and install Hisuite or Huawei Driver. Here
5. Downl0ad ADB-fastboot-tool-2016.zip - Here
6. D0wnload TWRP For Huawei GR5 2017 EMUI 5.0 - Here

Installation Guide.

1. Before flash a custom TWRP, you need to backup everything 
2. Connect your Huawei Mate 9 to the computer via USB cable.
3. Install Hisuite or Huawei driver.
4. Extract ADB fastboot tool 2016, ZIP file contains the following files and folder;
• adb
• driver
• xp
• install.bat

  

  ADB fastboot mate 9

5. Then, copy twrp-GR5-2017.img to the adb folder.
6. Now rename to recovery.img

   

   TWRP Huawei Mate 9

7. Then, from the ADB fastboot folder right click and hold the shift button, and click open command window here or Open with Powershell

   

   open command in adb fastboot

8. Now, you need to verify your Huawei GR5 connected to the computer or not by type the following command.

• adb device.

9. Once your Huawei GR5 2017 successfully connected, you will see that your device ID is listed in the prompt
• list of devices attached ...
• device ID
  
  
10. Then you need to reboot your Huawei GR5 2017 into bootloader using this command and press enter

• adb reboot bootloader




Just wait a minute, your device will reboot into fastboot and rescue mode.

Once your device in the fastboot and rescue mode, it's time to flash TWRP recovery to your device. Therefore you need to type this command at prompt and then press enter button




• fastboot flash recovery recovery.img




wait for 2 or 3 seconds for the complete flashing process.

Done, now you have successfully installed/flashed TWRP-GR5-2017 on Huawei Mate 9 with EMUI 5.0.

Enjoy it.