Guide | Install TWRP 3.1.1-0 Huawei P8Lite By OpenKirin.

TWRP Huawei P8Lite. If you want to install TWRP recovery on your Huawei P8Lite, try to read the following guide. This is unofficial TWRP for stock EMUI 4.x device. This guide from the XDA thread surdu_petru, By installing TWRP on your device, you can install the custom ROM. TWRP is one of the widest recovery used by Android phone user, because it is easy to use and an easy-to-understand interface.

Why you should install this TWRP version compared the official version? Because, if you want to restore EMUI firmware you don't need to wipe: /data/cust. and there are many more advantages that you can get by installing TWRP OpenKirin.

Prerequisite.

Downl0ad TWRP OpenKirin (md5 : 29e1c65cf48803892946e858ebe950cf). Here
Make sure the Huawei P8Lite Bootloader is unlocked. see this guide to unlock Huawei bootloader.
Enable USB debugging on your phone.
D0wnl0ad ADB and fastboot from Here
Enable OEM unlock

Installation Guide.

Make sure your device is Huawei P8Lite in order to follow this guide.
Make sure your Huawei P8Lite running EMUI 4.x
Extract TWRP OpenKirin, now then put recovery.img into a platform-tools folder inside ADB folder.
Now, connect your Huawei Honor P8Lite to the computer via USB cable.
Run command prompt from the ADB fastboot folder, How to do it?

From the empty space, right-click the mouse and Hold down shift button.
Now, select open command here

Then, from the command prompt window type the following command.

adb device

The command prompt should return your device ID serial number. If so, you have successfully connected your phone to the computer.
Once your Huawei P8Lite successfully connected, now type the following command.

adb reboot bootloader

Just wait for a second, your Huawei P8Lite will reboot into fastboot and rescue mode.

Once your device in the fastboot and rescue mode, it's time to flash TWRP 3.1.1-0 OpenKirin to your phone. Therefore you need to type this command at prompt and then press enter button

fastboot flash recovery recovery.img

Just wait for 2 or 3 seconds for the complete flashing process.

How to Boot Huawei P8Lite into Recovery.

Make sure your device is still connected to the computer while check the TWRP is working or not.
From the command prompt type the following command and press enter

adb reboot recovery

Then, back to your phone and now it will enter the recovery mode as shown in the image below.
enter TWRP recovery mode
And now your device will boot into TWRP recovery.