Below is the direct link to download the Itel Selfie Pro IT1511 Stock Firmware (flash file) this Firmware contains Flash Tool, Driver and instructions.
Take a Backup of your personal data before flashing or installing the firmware on your smartphone. As this helps you to recover the personal data whenever any thing wrong happens.
Take a Backup of your personal data before flashing or installing the firmware on your smartphone. As this helps you to recover the personal data whenever any thing wrong happens.
QUICK SPECS OF iTEL iT1511Dimension - 151 x 77 x 9.3 mm
5.0 - inch Touchscreen, 720 x 1280 pixels
Weight - 155g
1.0 GHz Quad-Core Processor
MediaTek
Mali T720 GPU
1GB RAM
8GB Internal Memory
up to 32GB microSD
8MP Rear Camera, Dual LED Flash, Auto Focus
2MP Front Camera
Dual SIM
EDGE , GPRS - 850 / 900 / 1800 / 1900MH
WCDMA 900/2100
4G LTE
WIFI 802.11 b/g/n
bluetooth 4.0
2500mAh Battery.
How to Flash iTEl iT1511
5.0 - inch Touchscreen, 720 x 1280 pixels
Weight - 155g
1.0 GHz Quad-Core Processor
MediaTek
Mali T720 GPU
1GB RAM
8GB Internal Memory
up to 32GB microSD
8MP Rear Camera, Dual LED Flash, Auto Focus
2MP Front Camera
Dual SIM
EDGE , GPRS - 850 / 900 / 1800 / 1900MH
WCDMA 900/2100
4G LTE
WIFI 802.11 b/g/n
bluetooth 4.0
2500mAh Battery.
How to Flash iTEl iT1511
- Download and extract the stock firmware on your computer.
- After extracting you will find the SP Flash Tool, Driver and instruction manual.
- Install the USB Drivers (skip if drivers are already installed).
- Open the SP Flash Tool and load the Scatter File from the firmware folder.
- Connect your Smartphone to the computer using the USB Driver.
- Click on Upgrade / Download Button in the SP Flash Tool to Begin the Flashing.
- Green Ring will appear at the end of successful Flash.
0 comments:
Post a Comment