How to Flash Firmware on Motorola Moto G (3rd gen) With RSD Lite Flash Tool.

Flash on Motorola Moto G (3rd gen). On this guide below we will show you how to flash or install a new firmware on Motorola Moto G (3rd gen), flashing this device necessary if the firmware has any problem, such as, bricked or bootloop. To install or flash a new firmware into Motorola Moto G (3rd gen) device, we need a flash tool called RSD Lite. This software is free to download from the official website. Once this RSD Lite successfully downloads, now install it on your computer. After that, select the best firmware appropriate with your  Motorola Moto G (3rd gen) device. This guide is very simple and easy to be followed for everyone, even for beginners user. 

Before we proceed this guide, now let we see the Motorola Moto G (3rd gen) specifications. This device run on Android OS, v5.1.1 (Lollipop), upgradable to v6.0 (Marshmallow), Powered by, Quad-core 1.4 GHz Cortex-A53 CPU, Qualcomm MSM8916 Snapdragon 410 chipset, Adreno 306 GPU. 2 GB of RAM. And supported by 13 MP of primary camera, 5 MP of secondary camera. Motorola Droid Turbo 2 released on 2015, July.

Below the tutorial flash, Motorola Moto G (3rd gen) begin.

Step 1: Preparations.

1. Backup all files, data, App, and accounts stored in internal memory, to avoid losing them during flashing process.
2. Make sure to charge Motorola Moto G (3rd gen) battery.
3. Always use an original USB cable to keep a good connection between your Motorola Moto G (3rd gen) device and the computer.
4. Make sure to install Motorola Moto G (3rd gen) driver on your computer. You can manually download this driver via this link .
5. To flash a firmware into the Motorola Moto G (3rd gen) you need download and install RSD Lite on your computer, get the file Here.
6. The appropriate firmware for your Motorola Moto G (3rd gen) device, you can get below;
• Motorola Moto G (3rd gen) Here 

Step 2 - Flashing Device.

1. Boot your Motorola Moto G (3rd gen) device to Fastboot mode. How to do it?
• Power off the Motorola Moto G (3rd gen), by press and hold the power button for a second, it will completely turn off the device.
• Now, press and hold both volume down + volume up button.
2. Now, connect your Motorola Moto G (3rd gen) to the computer via USB cable.
3. Make sure your Motorola Moto G (3rd gen) successfully detected on your computer via Fastboot mode.
4. If there is something wrong, you can try to change USB cable or computer port.
5. Now, Open your RSD Lite software on your computer from start menu.
6. Then click the button marked with the arrow and red circle shown at picture below to load Motorola Moto G (3rd gen)  firmware.

   

   RSD Lite load a firmware

7. Firmware file should have this extensions (*.hs, *.xml, *.shx, *.sbf, etc)
8. Once your Motorola Moto G (3rd gen) firmware successfully loaded, RSD lite flash tool should look like picture shown below.

   

   rsd lite - flash Motorola Moto G (3rd gen)

9. Now click start button at RSD lite window to begin the flashing process.
10. Flashing your Motorola Moto G (3rd gen) will start automatically without your interference.
11. Just wait a while until flashing your Motorola Moto G (3rd gen) done.