Home » » Guide | Flash Official Stock ROM / Firmware on Samsung GALAXY ACE NXT With ODIN.

Guide | Flash Official Stock ROM / Firmware on Samsung GALAXY ACE NXT With ODIN.

Posted by Android Flash Firmware on Saturday, September 17, 2016

Guide | Flash Official Stock ROM / Firmware on Samsung GALAXY ACE NXT With ODIN.

Flash Stock Firmware Samsung GALAXY ACE NXT. If you need an information how to Flash a new Stock ROM or Firmware on Samsung GALAXY ACE NXT, you're at the right place now. There are some reasons why we need flash our Samsung device, for example : Our Samsung device get bootloop, or stuck on Samsung logo, or we want to restore device to the factory settings. Flashing Samsung device with this method take a lot of risk, therefore you must be carefully to do it, and we suggest you to use Samsung’s own utilities OTA (Over-the-air) or Samsung Kies to upgrade your Samsung device. Use this method only if you sure one-hundred percents about risk caused due flashing your Samsung GALAXY ACE NXT device.

Samsung GALAXY ACE NXT  also known as Samsung Galaxy V G313HZ in Malaysia, Samsung Galaxy Ace NXT G313H, Samsung Galaxy Ace NXT G313HZ in Bangladesh, Samsung Galaxy Trend Neo. This device is released on 2014, August. Samsung GALAXY ACE NXT is the smartphone with 4,0 Inches TFT capacitive touchscreen, 16M colors, work on Android OS, v4.4.2 (KitKat), Powered by 1.2 GHz CPU, combined with 512 MB of RAM and 3.15 MP of  Main camera and Vga on secondary camera. 

Prerequisite.

Below is the following tools you must download to flashing your Android Samsung GALAXY ACE NXT device.
  1. Make sure your Samsung GALAXY ACE NXT is fully charged. or minimum has 99% of battery capacity. It will avoid the flashing failure process.
  2. Flashing process will delete or wipe all data stored in internal memory. So, don't forget to backup all data before flashing device.
  3. Make sure you have installed a latest of the Samsung driver, that support with your device, If you don't have, you can download here 
  4. Original USB cable driver for your Samsung GALAXY ACE NXT.
  5. Download Odin V3.11.1, Here.
  6. Firmware Download. (use one of the 3 methods below to download Samsung Firmware)
    • One. Download Official firmware file for the model number of your device, download it from - SamMobile, Hereor you can visit the other site, Here.  
    • Two. Guide How to Download Official Samsung Firmware From SamMobile. Here 
    • Three. Firmware Samsung GALAXY ACE NXT, you must Log In to download firmware via this link.
      • SM-G313H - South Africa, Egypt, Kenya, South Africa, Ukraine, Uzbekistan, Russia, Thailand, Nigeria, Libya, Tunisia, United Arab Emirates, India, Nigeria, Morocco, South Africa, Kenya, Papua New Guinea, Iran, Pakistan, - Here 

Guide To Flash Samsung GALAXY ACE NXT 

  1. Download all prerequisite file above
  2. Then, install all driver to your computer or PC.
  3. Extract Odin V3.11.1. file on the destination folder.
  4. Switch Off your Samsung GALAXY ACE NXT to start flashing process.
  5. Then, run Odin3 v3.11.1 by right click on Odin.exe and select Run as Administrator.
    Flash Stock Firmware On Samsung GALAXY ACE NXT
    Flash Stock Firmware On Samsung GALAXY ACE NXT
  6. When program is running, now you can click AP, and navigate to the *.tar or *.tar.md5 firmware file. 
    Flash Stock Firmware On Samsung GALAXY ACE NXT
    Flash Stock Firmware On Samsung GALAXY ACE NXT
  7. Now your firmware file has been inserted in Odin3 
    Flash Stock Firmware On Samsung GALAXY ACE NXT
    Flash Stock Firmware On Samsung GALAXY ACE NXT
  8. Then, Enter download mode your Samsung GALAXY ACE NXT. See this guide how to do it.
  9. On this mode, now connect your Samsung GALAXY ACE NXT to your PC / laptop using a USB cable. 
  10. After your phone connected, you will see a message appear that show your device added and there is info on the ID: COM at top left corner. Keep in mind for this COM vary depending on the PC / Laptop. Just Ignore all, in this picture you will see that your device is detected on (COM 5)
    Enter download mode samsung GALAXY ACE NXT
    Port Com Samsung GALAXY ACE NXT
  11. Make sure re-partition is NOT ticked
  12. When everything already you can click Start Button. at the bottom left corner
  13. Just wait for the process to run about 2-5 minutes, and make sure there is no interference in this process. 
  14. When complete it will display a notification PASS and your smartphone Samsung GALAXY ACE NXT will automatically restart.
  15. Wait your device to boot up, it will take a while.
  16. When your Samsung GALAXY ACE NXT is ready to use, now check your firmware version. See this guide how to check it.
  17. Finish.


0 comments:

Post a Comment

Popular Posts

Blog Archive

.comment-content a {display: none;}