EUROSTAR ET9183G-HM14 MT6572 Firmware

Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 8801034E436172642023EFE00001B1BB
Initialize Memory ... 
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x88 , OEM : 0103
[eMMC] : FLASH_INF : [FORESEE] , draC
[eMMC] : FLASH_CID : 8801034E436172642023EFE00001B1BB
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00020000
[eMMC] : FLASH_LEN : 0x00000001CE100000
[eMMC] : FLASH_UCP : 7393 MiB [eMMC 8 GiB]
DEV RID    : 0x0D22E2283C5DA0553F412B4A936946C5
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ... 

Brand     : alps
ProdName  : gq_709_common_huima_hm14
ProdModel : ET9183G-HM14
Device    : gq_709_common_huima_hm14
AndroidVer: 4.4.2
MTKxCPU   : MT6572
MTKxPRJ   : sw01_hm_ET9183G-HM14-20150122

[Read Ok] : preloader_gq_709_common_huima_hm14.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6572 / V1.1.1 / gq_709_common_huima_hm14 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 713 MiB
Scatter saved to : 

MT6572__alps__ET9183G-HM14__gq_709_common_huima_hm14__4.4.2__sw01_hm_ET9183G-HM14-20150122

preloader_gq_709_common_huima_hm14 (98.2Kb)
 Password: gq_709

[post_ad]

How To Flash:

• Its a Scatter file you can flash it with SP Flash Tool or any Flasher Box 
• Select “scatter-Loading” and Slect MT65XX_Android_scatter.txt in folder
• Wait file to be added into Flash Tool Or Any Flashing box
• Select “Download Only” or if upgrade “Firmware upgrade” in Flash Tool
• Turn off your phone
• Press “Download” Button to start
• And connect your phone with PC via USB data cable.
• The process will start and a red progress bar will appear after color purple, yellow.
• And green circles display
• Finish !
• You can now safely disconnect your phone and turn it on.
• its Done..!

Full Tutorial Here

Join Us For Updates!