How To Use Your Pendrive As A Ram In Windows

 Does your computer hangs up during some operation or do any programs need more ram to run.Don’t worry now you can use your pendrive as a ram.Yes you can convert your pendrive into a virtual memory and use it as a ram in windows running pc/laptop.This method will help you to run complicated programs that eat your ram and also helpful to speed up low ram systems.For this tutorial you need a pendrive which have minimum 2GB memory.And then just follow below steps:

---

►Step 1

---

Connect your pendrive and “Format” it.

---

►Step 2

---

After that Right Click on pendrive and choose “Properties”

---

►Step 3

---

Now a small window will popup.In that window select “ReadyBoost“.Now choose “Use this device” and set maximum space to reserve for system speed.After that click “Apply” and then “Ok”

And now your pendrive will work as a ram for your computer.

And keep in mind do not disconnect pendrive in the middle of an operation,it will freeze your sytem.If you want to disconnect it,then again Right click on pendrive then choose “Properties” and then “ReadyBoost” and select “Do not use this device“.After that click “Apply” and then “Ok“.And then “Format” it again.

---

Warning:

---

• This method will shorten the life of the USB. Normal flash drives have limited numbers of writes. For normal usage, it takes a long time for the writes to run out. However, if used as RAM where millions of transfers are done every minute, the life of the drive may be significantly shortened.
• Do not remove the USB. It’ll crash your system. However, simply plugging the USB back in and rebooting will fix the crash.z